广东快乐十分开奖直播

    鱼缸定做之粘缸的步骤!
    来源:http://www.bhvycea.com  2019-08-19 20:07:33

    鱼缸,是每个饲养鱼者家中必备的物品。多数新手养鱼玩家一般选择直接购买成品缸,但是也有不少玩家选择DIY鱼缸,亲手进行粘缸。因为自己动手进行鱼缸制作,可以根据具体条件进行实际操作,比如:饲养者家中的空间、喜好的鱼缸尺寸大小等。

    The aquarium is a necessary item in the home of every fish breeder. Most beginners usually choose to buy the finished aquarium directly, but many players choose DIY aquarium to stick the aquarium by themselves. Because we can make the fish tank by ourselves, we can carry out the actual operation according to the specific conditions, such as: the space in the breeder's home, the size of the fish tank and so on.

    那么,要怎么进行粘缸呢?粘缸要做哪些准备?下面济南鱼缸定做的小编就给大家总结一下!

    So, how to stick the cylinder? What are the preparations for sticking cylinders? The following Jinan fish tank customized small edition for you to sum up!

    首先:整体设计。养鱼要多大的缸呢?首先需要画出要鱼缸的具体规格,每块玻璃的厚度大小都进行精确计算。其中宽度建议为60公分,保证鱼能够正常游动。

    First of all: the overall design. How big is the aquarium for fish farming? Firstly, we need to draw the specifications of the fish tank, and calculate the thickness of each glass accurately. Among them, the width is recommended to be 60 cm to ensure that the fish can swim normally.

    第二步:准备工具。粘缸玻璃胶、打胶枪、直角拐尺、胶布、剪刀、卷尺、绳子、火柴硬卡片、美工刀。 在此说明一下粘缸玻璃胶的选用,市场上的玻璃胶很多,适合粘缸的是酸性胶。其中的水族专用胶和结构胶,都适用于大型鱼缸的制作,但从固化、粘度方面看,后者的质量优于前者。

    济南鱼缸定做

    Step 2: Prepare tools. Glue cylinder glass glue, glue gun, right corner ruler, rubber cloth, scissors, tape ruler, rope, matches card, art knife. In this paper, the choice of glass glue for cylinder glue is explained. There are many glass glues on the market. The acid glue is suitable for cylinder glue. The aquarium special adhesive and structural adhesive are suitable for the manufacture of large fish tanks, but the quality of the latter is better than the former in terms of curing and viscosity.

    第三步:粘缸。粘缸的顺序依次是后侧玻璃、底面玻璃、左侧玻璃、右侧玻璃、前面玻璃。粘制玻璃时,先在两块玻璃的缝隙中插入火柴棒,方便往缝隙里均匀地打胶,打完胶后拔出即可,压紧缝隙。打胶时怕影响美观,可在玻璃距离边缘5毫米的地方贴上胶布。粘缸以两次打胶为主,一次是为了粘玻璃之间的缝隙,二次是为了加固。打胶完后,用废卡片刮去多余的胶,撕掉保护用的胶布,用绳子把鱼缸捆起来,等待胶干。胶干后,二次打胶,常温中一天之内不要再碰鱼缸,以免松动或者固化效果不佳。

    Step 3: Stick cylinder。 The order of sticking cylinder is rear glass, bottom glass, left glass, right glass and front glass。 When bonding glass, first insert matchsticks into the cracks of two pieces of glass to make it easy to glue evenly into the cracks, then pull out after gluing, and press the cracks tight。 When gluing, for fear of affecting the beauty, you can stick adhesive tape at a distance of 5 mm from the edge of the glass。 The main purpose of gluing cylinder is to glue the gap between glass and reinforce it twice。 After gluing, scrape the excess glue with the waste card, tear off the protective tape, tie up the fish tank with rope, and wait for the glue to dry。 After drying, do not touch the Aquarium within one day at normal temperature, so as to avoid loosening or poor curing effect。

    粘缸的玻璃胶,一般会刺激呼吸道、对皮肤不好,所以尽量戴着医用乳胶手套在户外或者通风条件好的地方进行粘缸。

    The glass glue sticking to the cylinder will generally stimulate the respiratory tract and is not good for the skin, so try to wear medical latex gloves to stick to the cylinder outdoors or in places with good ventilation conditions。

    好了,今天的精彩内容就先给大家介绍到这里了!济南鱼缸定做的小编会定期为大家整理发布一些行业信息,欢迎大家收藏我们的网站:http://www.bhvycea.com

    Well, today's wonderful content will be introduced to you here first! Jinan Fishbowl Customized Editorial Meeting regularly organizes and publishes some industry information for you. Welcome to collect our website: http://www.bhvycea.com.


博客来棋牌下载 广东11选5走势图 博客来棋牌 华夏棋牌app下载 博客来棋牌 广东快乐十分开奖结果 广东11选5 广东11选5 华夏棋牌 广东11选5APP下载